Nexiq Blue-Link ELD 16-Pin OBDII Bluetooth Device

The Nexiq Blue-Link ELD is designed to work with the various ELD software manufacturers. This version is designed for vehicles with an OBDII connection.

Features

• 1939 Protocol
• OBD CAN (ISO15765) Protocol
• Calculated Engine Hours If No ECM Support

General Support

• Seamless Background OTA Firmware Updates
• Secure Communications and Firmware Updates
• Limited access to BLE bondable mode via physical pushbutton on device with built-in timeout.
• All communications between mobile client and device employ standard BLE encryption.
• Authentication required between mobile client and device to enable datalink communications, and to enable OTA device firmware update.
• Encrypted firmware update file.
• Running firmware locked and encrypted to prevent data extraction.
• Automatic Vehicle Link Detection for ELD Data of Interest (Engine Controller)
• CAN auto-baud detection
• Calculated Odometer Support If No ECM Support
• Fully-Documented Driver/Device API for Developing Mobile Apps To Communicate with the ELD

Bluetooth Support During Active Connection

• Device Notification of Powered-On Date and Time
• Log Record Parameter Support with Selectable Raw Data or Pre-Scaled Format, with the following information
• GPS position and UTC time data
• Vehicle Identification Number (VIN)
• Engine serial number
• Odometer
• Engine hours
• Vehicle speed
• Log Records Notifications Automatically Occur at 15-Minute Intervals
• Updated Log Record Can Also Be Requested Immediately by Mobile Client
• Automatic Notification Of Each Vehicle Motion State Change
• Key Off
• Key On (Engine Off)
• Key On (Engine Running)
• Automatic Notification of Each Vehicle Motion State Change
• In-motion event = vehicle exceeds 5mph after being considered motionless
• Motionless = vehicle motionless for more than 3 seconds after being considered in-motion
• Automatic Data Capture Timeout Notifications
• Device checks for more than 5 seconds without one or more required core parameters being received from expected source (ECM or calculated), and sends notification to client application on each occurrence.
• The following parameters subject to DCT check:
• Odometer
• Engine hours
• Engine speed
• Vehicle speed
• Configurable Distance Traveled Notifications
• Device sends periodic odometer notifications to mobile client for specified distance traveled. Default trigger is 5 miles, configurable via API call.
• Configurable Hard Driving Detection and Notifications:
• User-configurable mph/s threshold for device detecting hard acceleration/deceleration events and sending notifications back to mobile client

Bluetooth Support During Vehicle Activity with no Application Connection

• Log Record on-device archiving, with flag indication of reason for each capture.
• On subsequent mobile application connection, archived log records can then be retrieved via the following defined API commands:
• 15-minute periodic capture when engine running
• Ignition-on (engine running) / Ignition-off events
• Driving / Not Driving Events
• Driving = 5mph or greater detected
• Not Driving = motionless for more than 5 minutes after "Driving" event detected
• Initial Data Capture Timeout event, i.e., first time any of 4 core parameters not received within 5-second timeout is detected.
• Data Capture Recovery event, i.e., all four core parameters received within 5-second window after initial Data Capture Timeout event has been previously captured.

Easy Returns

When you buy from Diesel Laptops, we want to make sure you're happy with your purchase. You may return this product within 30 days of delivery, with a small 15% restocking fee. It's part of how we keep things fair for everyone.

For more details, please visit our Return Policy page below.

View Return Policy

Questions?

If you have any questions about this or any other product, please don't hesitate to contact one of our Diesel Laptops experts at (888) 983-1975 or by clicking below!

Contact Us